This Firmware update provides Beta support for HALTECH ELITE ECM CAN bus protocol v2.0
Elite ECM must be loaded with firmware to support CAN Bus Speeds of 250 kbs.
This update provides support for SeaSmart WIFI Gateways with NMEA 2000 interfaces.
The complete update requires 3 steps.
1) Update SeaSmart WIFI Firmware on gateway using USB and Windows PC Utility Firmware Downloader v0.91
2) Update NMEA 2000/CAN Bus interface using Windows OS vDash app
3) Update the Gateway Web Site content package using the supplied .bin file.
Once all 3 updates are complete, HALTECH ELITE CAN Bus messages can be read by SeaSmart WIFI Gateways and translated into NMEA 2000 messages on the same bus.
Additionally, the SeaSmart Web Browser interface will also display ELITE CAN Bus messages and forward all messages to the HelmSmart cloud service for storage and dashboarding.
Local data logging to SD Memory card will also be available for ELITE CAN Bus messages which can then uploaded to the HelmSmart cloud service.
The following NMEA 2000 PGNs are supported in this release
PGN 127488 – Engine rapid
PGN 127 489 – Engine Dynamic
PGN 127505 – Fuel Level
PGN 127493 – Transmission
The following HALTECH ELITE CAN Messages are supported in the Web Browser interface
PGN65376 - HALTEC Engine Speed", "0x360"
PGN65377 - HALTEC Engine Pressure", "0x361"
PGN65394 - HALTEC Engine Volts", "0x372"
PGN65504 - HALTEC Engine Temps", "0x3E0"
PGN65514 - HALTEC Gearbox Pressures", "0x3EA"
PGN65505 - HALTEC Gearbox Temps", "0x3E1"
PGN65393 - HALTEC Fuel Flow", "0x371"
PGN65506 - HALTEC Fuel Level", "0x3E2"
The following Haltech Elite CAN Messages are supported for data logging and upload to HelmSmart Cloud service
0x360 50 0 - 1 RPM RPM y = x
0x361 50 0 - 1 Fuel Pressure kPa y = x/10
0x362 50 0 - 1 Injection Stage 1 Duty Cycle % y = x/10
0x363 20 0 - 1 Wheel Slip km/h y = x/10
0x368 20 0 - 1 Wideband Sensor 1 y = x/1000
0x369 20 0 - 1 Trigger System Error Count y = x
0x36A 20 0 - 1 Knock Level dB y = x/100
0x36B 20 0 - 1 Brake Pressure kPa y = x/10
0x36C 20 0 - 1 Wheel Speed Front Left km/h y = x/10
0x36D 20 4 - 5 Exhaust Cam Angle 1 ° y = x/10
0x36E 20 0 - 1 Engine Limiting Active y := 0=Off,1=On
0x36F 20 0 - 1 Generic Output 1 Duty Cycle % y = x/10
0x370 20 0 - 1 Vehicle Speed km/h y = x/10
0x371 10 0 - 1 Fuel Flow cc/min y = x
0x372 10 0 - 1 Battery Voltage Volts y = x/10
0x373 10 0 - 1 EGT Sensor 1 °K y = x/10
0x374 10 0 - 1 EGT Sensor 5 °K y = x/10
0x375 10 0 - 1 EGT Sensor 9 °K y = x/10
0x3E0 5 0 - 1 Coolant Temperature °K y = x/10
0x3E1 5 0 - 1 Gearbox Oil Temperature °K y = x/10
0x3E2 5 0 - 1 Fuel Level L y = x/10
0x3E3 5 0 - 1 Fuel Trim Short Term Bank 1 % y = x/10
0x3E4 5 1:5 Gear Switch y := 0=Off,1=On
0x3E5 50 0 Ignition Switch y := 0=Off,1=On
0x3E6 20 0 - 1 NOS Pressure Sensor 2 kPa y = x*11/50
0x3E7 20 0 - 1 Generic Sensor 1 Switch y := 0=Off,1=On
0x3E9 20 0 - 1 Generic Sensor 9 Switch y := 0=Off,1=On
0x3EA 50 0 - 1 Gearbox Oil Pressure kPa y = x/10
0x3EB 50 0 - 3 Race Timer ms y = x
0x3EC 50 0 - 1 Torque Management Driveshaft RPM
0x3ED 50 0 - 1 Torque Management Combined Ignition
